Certified according to EN 12209 – safety class 3.
Corrosion protection – class 4 according to EN 1670 (withstands a 240-hour salt spray test).
Latch made of hardened steel.
Stainless steel ratchet.
The lock is locked by turning the key 45 degrees.
Front lock plate – matte chrome color.
Protection against lock compression during cylinder installation.
The handle is always in a horizontal position.
Suited to be used in fire-resistant doors.
The locks are tested for a minimum of 200,000 cycles.
Protection against drilling through the lock body is additionally equipped.
Available with: oval one-sided or oval double-sided cylinder.
Certified according to EN 12209 – Class 5 safety.
Integrated protection against drilling through the lock body.
Corrosion protection – class 4 according to EN 1670 (withstands 240-hour salt spray test).
Protection against tampering (latching) – TR29
Hook made of hardened steel.
Stainless steel ratchet.
The lock is locked by turning the key 360 degrees.
Front lock plate – matte chrome color.
Protection against lock compression during cylinder installation.
The handle is always in a horizontal position.
Suitable for use in fire doors.
The locks are tested for a minimum of 200,000 cycles.
Available with: oval one-sided, oval double-sided, round one-sided or round double-sided cylinder.
This is the cheapest on the market, a quality Scandinavian lock with a body of a European manufacturer (Dorma 712).
The S-PRO cylinder is protected against drilling by hardened steel elements.
The Dorma712 body of this lock has sound insulation – the lock works extremely quietly.
Also, the lock has a three-layer latch and a zinc-plated plate.
The lock is equipped with polished chrome-plated handles, as well as an internal screw, i.e. the lock is locked from the inside by turning the screw – this is very convenient because when you enter the house you can simply turn the screw to lock the lock without looking for the key.
Comes with 3, 5 or 30 keys.
This is the cheapest on the market, a quality Scandinavian lock with a body from a European manufacturer (Dorma).
The S-PRO MULTICODE cylinder is protected against drilling by hardened steel elements.
The lock comes with a construction key that only works as long as at least one of the five individually packaged master keys is used.
The Dorma 712 body of this lock has sound insulation – the lock works extremely quietly.
Also, the lock has a three-layer latch and a zinc-plated plate.
The lock is equipped with polished chrome-plated handles, as well as an internal screw, i.e. the lock is locked from the inside by turning the screw – this is very convenient because after entering the house you can simply turn the screw to lock the lock without looking for the key.
Comes with 5+1 MULTICODE keys.
Comes with Dorma 712 lock bodies
Patented locking system, patented double key profile (patent valid until 2026);
Legally, technically and organizationally, the key is protected from illegal copying, a copy of the key is made only upon presentation of the key and identification card;
The highest 6th security class according to the main European standard regulating the safety of lock cylinders EN 1303:2005;
Wear-resistant nickel silver alloy key;
The possibility of making complex and large central key systems and combining different types of locks into one system: door locks, mailbox locks, padlocks
The EVVA EPS cylinder has the following protections:
Double protection against cylinder puncture;
Protection against unlocking with a screwdriver;
Protection against unlocking with an electric manipulator;Protection against unlocking by “bumping” method;
Protection against key selection and scanning;
Protection against defeating the cylinder by pulling out its inner part;
Cylinder locking in three places with 360 degree locking.
According to the main European standard regulating the safety of lock cylinders EN 1303:2005, the EVVA EPS cylinder is certified for the 6th (highest) security class and the 2nd (highest) class against brute force.
There are 3 or 5 keys in the set.
The most famous and probably the best EVVA product of all time, it has won several international awards and is considered one of the best lock cylinders in the world. EVVA 3KSplus is a unique, patented, springless locking system, in which the conformity of the key is checked in as many as four places. Unlike conventional locking systems, in the EVVA 3KSplus cylinder, the internal components slide through the internal key grooves without any springs. The springless locking system guarantees the highest resistance to wear and ensures absolute protection against unlocking with an allen key.
Comes with Dorma 712 lock bodies;
Unique springless three-line system;
The highest protection against all known methods of defeating the cylinder;The internal components of the cylinder are coated with Teflon, which makes the cylinder extremely resistant to wear;
The cylinder is protected against the effects of sea water and salts;
The cylinder is insensitive to dust and even ice; The cylinder is suitable for use in a chemically aggressive environment;
Wear-resistant, convenient nickel silver alloy key that can be inserted into the cylinder from either side;
The match of the key is checked in as many as four places and, when locking accordingly, it is blocked in two places; Up to 30 billion key combinations;
Patented locking system and multi-level key profile (patent valid until 2025);
Legally, technically and organizationally, the key is protected from illegal copying;
The possibility of making huge central key systems connecting thousands of doors;
The key can be inserted into the cylinder from either side;
EVVA 3KSplus has the following protections:
A unique dual coding system consisting of 12 intricately shaped pins with misleading cutouts;
5 levels of protection against cylinder puncture. Cylinder blocking in even 2 places;
100% protection against unlocking with a screwdriver;
100% protection against unlocking with an electric manipulator;
100% protection against unlocking by the “bumping” method;
Maximum protection against key selection, scanning and cylinder unlocking using other electronic devices;
Protection against defeating the cylinder by extracting its inner part.
According to the main European standard regulating the safety of lock cylinders EN 1303:2005, the EVVA 3KSplus cylinder is certified for the 6th (highest) security class and the 2nd (highest) class against brute force.
The highest C corrosion resistance class according to the EN 1303 standard. 5 keys included.
Scandinavian type lock.
The Assa 601 cylinder is protected against drilling by hardened steel and carbide pins.
The Assa 565 body of this lock works extremely quietly.It has a three-layer latch and a zinc-plated front plate.
The lock is equipped with polished chrome-plated handles, as well as an internal screw, i.e. the lock is locked from the inside by turning the screw – this is very convenient, because upon entering the house, you can simply turn the screw to lock the lock without looking for the key.
3 or 5 keys included.
ASSA 2002
EVOLUTION series lock.
Reinforced lock body.
Single latch and latch lock.The hook-shaped latch (sustains a force of 2 tons), made of three layers of special metal, locks in case of breakage.
The self-adjusting latch of a special shape (smoothed corners) adapts to the frame.
The protective plate protects the lock from drilling.
Double-sided round reinforced cylinder ASSA 612 (key + key and additional screw from the inside).
The cylinder cannot be disassembled without a key. Increased security with twist lock mechanism.
By pressing down the latch located on the front plate of the lock and locking the lock with the key, we block the operation of the spinner.
Then the lock cannot be unlocked even from the inside without a key.
When unlocking the lock with the key, the function of the spinner is automatically restored.
Protection against drilling, acid, cutting.
3 small keys included.
Manufacturer Sweden.
Reinforced lock body.
Single latch and latch lock.
The latch is made of three layers of special metal.
Double-sided round reinforced cylinder ASSA 712 (key + key and additional screw from the inside).
The cylinder cannot be disassembled without a key.
Safe and convenient lock.
By pressing down the latch located on the front plate of the lock and locking the lock with the key, we block the operation of the spinner.
Then the lock cannot be unlocked even from the inside without a key.
When unlocking the lock with the key, the function of the spinner is automatically restored.
Protection against drilling, acid, cutting.
3 small keys included.
Manufacturer Sweden.
The lock kit LC210 is designed for higher security doors.
Its tongue is controlled by turning the key 360 degrees.
Tongue made of several plates of different hardness.
The body of the lock is covered with a protective hard metal plate, which protects the body from drilling.
The lock body and cylinder meet the high 5-security class according to EN12209 and EN1303 standards.
Rotating cylinder guard made of hard metal, which protects against twisting and drilling.
The conical shape of the guard protects against impact if an attempt is made to knock it down.
The cylinder has excellent operational characteristics, it does not contain springs, rods, which can break or jam due to dirt, cold or acid.
The number of copies of a cylinder key can be 1.98 billion.
The key is manufactured only at authorized representatives, the key blank is patented.
All parts are made in Finland, at the ABLOY factory.
Chrome or matte chrome finish.
3 keys included.
The ABLOY BODAGUARD lock has been tested and approved according to the EN12209 standard and received the highest security class 7 standard.
Complete with protection against drilling on both sides of the lock.
Patented key and plate mechanism, 8 plates, 1,000,000 different combinations.
Patented screwdriver protection.
Patented protection against blade breakage.
All locks are registered at the factory and each lock has a registration number, keys are manufactured only at the factory, thus all information about the keys produced and the dealer who sold this lock is stored at the factory.
3 keys included.
MOTTURA is a world leader in the production of armored door locks.
The company was founded in 1972.
It produces the most secure locks for armored doors.
Since MOTTURA locks are created specifically for armored doors, every detail of the lock is made with maximum security in mind.
MOTTURA does not limit itself to even the highest safety standards.
The locks developed by the company far exceed them – this is confirmed by the tests performed during the certification.
MOTTURA 52783 – lock for the highest security level of armored doors 7th, the highest, lock security class according to EN 12209 and fire certificate.
The patented MOTTURA ANTIDECO II system protects against unlocking with an allen key.
Five powerful pins withstand even 1.5 tons (15kN) lateral pressure force.
Supplied as standard with a 2mm hardened manganese steel guard to protect key points of the lock from being drilled.
The set includes 5 asymmetric keys with ergonomic rubber and plastic mixture heads.
Locking in three directions, four turns of the key.
MOTTURA 52Y505 Nucleo Replay – recodeable lock for armored doors of the highest security level. MOTTURA Nucleo Replay allows you to change the locking combination of the lock an unlimited number of times.
In case of lost keys or suspicion that someone might have, the 7th, highest, lock security class according to EN 12209 and fire certificate can be obtained.
Patented MOTTURA ANTIDECO II system that prevents unlocking with a screwdriver.
Five powerful pins can withstand up to 1.5 tons (15 kN) of lateral pressure.
The set includes 5 asymmetric keys with ergonomic rubber and plastic mixture heads, presented in a sealed package.
Locking in three directions, four turns of the key.
In order to achieve the maximum level of security, it is recommended to equip this lock with a hardened manganese steel guard DEFENDER 52, which protects against drilling through the lock body.
MOTTURA 85783 lock with MOTTURA CHAMPIONS cylinder – designed for prestigious armored doors of the highest security level.
The MOTTURA CHAMPION lock is a unique security solution that combines a high-security lock body, a high-security cylinder with a small, convenient, copy-protected key and cylinder protection.
7th, the highest, lock security class according to EN 12209 and fire certificate.
Patented pin crush protection in standard kit.
Patented automatic locking of the lock when the cylinder is broken in the standard set.
When the cylinder is broken, the lock locks automatically and the lock locks into place.
Cylinder knock protection in standard kit.
Five powerful pins can withstand up to 1.5 tons (15 kN) of lateral pressure.
Hardened steel cylinder protection DEFENDER, fixed with special screws, in a standard set.
Locks in three directions, with two turns of the key.
In order to further increase security, it is recommended to equip this lock with hardened manganese steel protection DEFENDER 85, which provides additional protection against drilling through the lock body.
6th, the highest, cylinder security class according to the EN1303 standard.
This makes the cylinder extremely safe.
Keys protected against illegal copying.
In order to ensure that only the legitimate owner of the key can make a copy of the key, MOTTURA has patented and certified a key copying system, according to which MOTTURA MODULAR key copies can only be made in key workshops selected and controlled by the MOTTURA company, marked with the MOTTURA Club mark.
A copy of the key is made only upon presentation of the key and key identification card.
Patented and certified protection against unlocking by the bumping method.
The cylinder and its internal components are protected against drilling with special hardness steel bars.
Two-level protection against unlocking with a screwdriver
All internal components of the cylinder are covered with a coating that increases resistance to environmental effects. This ensures long-term performance of the cylinder.
Nickel-silver alloy keys are extremely wear-resistant. Special ergonomic key head.
Possibility to order Central Key Systems.
Can be with 3 or 5 keys.
MOTTURA 52N883 Nucleo Compact – lock with replaceable cartridge for armored doors of the highest security level.
Nucleo Compact allows you to change the locking combination of the lock an unlimited number of times. If you lose your keys, if you suspect that someone might have made a copy of your key, you don’t need to change the entire lock – you can replace the Nucleo Compact cassette – it’s very easy and quick to do. When you replace the Nucleo Compact cartridge, you get a new lock locking mechanism and new keys.
7th, the highest, lock security class according to EN 12209 and fire certificate.
Patented MOTTURA ANTIDECO II system that prevents unlocking with a screwdriver.
Five powerful pins can withstand up to 1.5 tons (15 kN) of lateral pressure.
Supplied as standard with a 2mm hardened manganese steel guard to protect key points of the lock from being drilled.
The set includes 5 asymmetric keys with ergonomic heads of a mixture of rubber and plastic, presented in a sealed package, which is opened only in front of the buyer.
Locks in three directions, with two turns of the key.
MOTTURA 40705-Safe lock.
Locking with four turns of the key, three directions.
This lock is designed for high security armored/security doors.
Nickel plated front lock plate.
Comes with polished chrome keyholes.
There are 5 keys in the set.
MOTTURA is a world leader in the production of armored door locks.
The company was founded in 1972.
It produces the most secure locks for armored doors.
Since MOTTURA locks are created specifically for armored doors, every detail of the lock is made with maximum security in mind.
MOTTURA does not limit itself to even the highest safety standards.
The locks developed by the company far exceed them – this is confirmed by the tests performed during the certification.
ISEO is a company founded in 1969 in Italy. The company started its activity by manufacturing cylinders. Today, ISEO is one of the largest companies in Europe in the lock manufacturing sector, producing 11 million cylinders per year in its factory in Italy alone.
FIAM 672 – cylindrical gear lock for high-security armored doors.
The lock’s unique gear locking mechanism: the lock is locked especially quietly and gently, less wear on the cylinder.
The special design of the gear mechanism and the hardened steel rods in it protect against pin compression and drilling through the mechanism.
Patented, strong cylinder mount to prevent cylinder knocking and breakage.
The main safety parameters meet the requirements of the 7th – highest safety class according to EN 12209.
Extra strong attachment of pins to the main lock plate.
Lockable in three directions.
The lock is equipped only with certified ISEO R7 or ISEO R6 PLUS cylinders and hardened steel protection.
3-year warranty and free 24-hour service. per day during the warranty period.
In order to achieve the maximum level of security, it is recommended to equip this lock with a hardened manganese steel guard DEFENDER 85, which protects against drilling through the lock body.
FIAM 672 – cylindrical gear lock for high-security armored doors.
The lock’s unique gear locking mechanism: the lock is locked especially quietly and gently, less wear on the cylinder.
The special design of the gear mechanism and the hardened steel rods in it protect against pin compression and drilling through the mechanism.
Patented, strong cylinder mount to prevent cylinder knocking and breakage.
The main safety parameters meet the requirements of the 7th – highest safety class according to EN 12209.
Extra strong attachment of pins to the main lock plate.
Lockable in three directions.
The lock is equipped only with certified ISEO R7 or ISEO R6 PLUS cylinders and hardened steel protection.
3-year warranty and free 24-hour service. per day during the warranty period.
In order to achieve the maximum level of security, it is recommended to equip this lock with a hardened manganese steel guard DEFENDER 85, which protects against drilling through the lock body.
Certified for safety class 5 according to the main European standard EN 1303, which regulates the quality and safety of cylinders.
Supplied with one “build” key which no longer locks if one of the four master keys is used.
Cylinder puncture protection.
Protection against unlocking with a screwdriver.
Ergonomic socket wrench that can be inserted into the cylinder from either side – especially recommended for families with children and the elderly.
Master keys are delivered in a sealed package that can only be opened in front of the owner of the key.
Identification card.
Key head of special rubber compound.
This lock is designed for metal doors.
Nickel chrome front lock plate.
Comes with polished chrome keyholes.
Locks in three directions.
There are 5 keys in the set.
When two locks are used in armored doors, ISEO has created a cylinder line that combines both locks into a common locking system – Tandem. Using the Tandem system, you will lock both (upper and lower) locks with one key. Together with the main keys of the system, you will also receive another, so-called “nanny” key, which will lock only one of the locks. This function is useful when you have to entrust the keys to the house to strangers: builders, babysitters, cleaners, etc. By locking both door locks, you can have peace of mind that someone with the “babysitter” key or a copy of it will not be able to unlock the door. Tandem provides a double benefit: 1) allows two different types of locks to be locked with one key – this is very convenient; 2) provides a “nanny” key function
ISEO Tandem consists of: main lock ISEO 672 with ISEO R6 PLUS cylinder and hardened steel cylinder protection, lower base lock with Dorma 712 lock, ISEO R6 cylinder, double fastening handles with nylon bearing, internal bolt with nylon bearing.
FIAM 672 – cylindrical gear lock for high-security armored doors
The lock’s unique gear locking mechanism: the lock is locked especially quietly and gently, less wear on the cylinder.
The special design of the gear mechanism and the hardened steel rods in it protect against pin compression and drilling through the mechanism.
Patented, strong cylinder mount to prevent cylinder knocking and breakage.
The main safety parameters meet the requirements of the 7th – highest safety class according to EN 12209.
Extra strong attachment of pins to the main lock plate. Lockable in three directions.
Additional non-codeable lock for security doors.
Three-sided fixation.
It is locked with a safe key.
The lock has six plates, the number of key variants depends on the number.
The advantage of the lock is that each plate has a separate spring that is mounted on the plate itself.
The advantage of such a technical solution is that the lock is locked much more quietly.
Manufacturer Italy. Comes with 5 keys.
Additional coded lock for security doors.
Three-way fixation:
Lockable with a safe key, each lock with a “building” key.
The lock has six plates, the number of key variants depends on the number.
A big advantage is that each plate has a separate spring that is mounted on the plate itself.
The advantage of this technical solution is that the lock works more quietly.
Manufacturer Italy. Comes with 5 keys.
The plate, additional, lock is designed for armor-type steel doors, can be locked with 4 turns of the key, the door is fixed in three places.
Lock with replaceable block, 5 keys, which is sealed at the factory and can only be opened in the presence of the buyer.
The lock is tested at the factory for at least 10,000 opening-closing cycles with the same key.
The lock body is protected by a steel-manganese alloy plate that protects against drilling.
The lock has a construction key, which is convenient when assembling doors in production, during construction when sealed keys cannot be used.
The lock meets the high security class 7 according to the ENV 1627-2000 standard.
The additional cylinder lock is designed for armored steel doors, locked with 3 turns of the key.
The cylinder has a working key and 5 original keys that are sealed at the factory.
The working key is used to install the lock and operate the door during construction, the original keys are provided to the end user – this ensures maximum security.
The key is made of nickel and silver alloys.
The key blank is patented, an additional key can be ordered from an authorized representative upon presentation of the card.
The hardened steel guard protects the cylinder from breaking and drilling.
The recommended cylinder dimensions are 35×45, 30×40.
The lock complies with UNI:ENV 12209:2005 standard class 3 and ISO 9001 quality management certificate.
The plate, additional, lock is designed for armor-type steel doors, can be locked with 4 turns of the key, the door is fixed in three places.
5 keys are included.
The lock complies with the ISO 9001 quality management certificate
Plate (6 plates) safe, recodable lock.
With security plate, replaceable cassette.
Protection against drilling, acid, cutting, visqueen.
The mechanism can be changed many times without the need for a master.
Three-way locking.
Includes 5 large keys in a box + 1 construction key.
Manufacturer Italy
Plate lock for steel armoured doors, lockable with 4 key turns.
The lock has 5 pins 18mm diameter.
Supplied with 5 keys
MUL-T-LOCK® 603 is a safe-type lock for armoured and metal doors.
The MUL-T-LOCK® patented key or key blank allows for an extremely high level of control over the production of the key, achieving a higher level of security. Duplicate keys are only produced on presentation of the MUL-T-LOCK® key card and after verification of the customer’s identity, in accordance with the MUL-T-LOCK® key production procedure, which can be explained by professional locksmiths authorised by MUL-T-LOCK®.
The MUL-T-LOCK INTERACTIVE cylinder with its high security level is uniquely designed with telescopic “Pins”. The cylinder is equipped with hardened steel anti-penetration guards and is secured against unlocking by “vise locks”. Unlocked by a small key, when the next stage keys are used, the previous keys will no longer lock, three-way locking. Gear mechanism: silent, reliable and strong locking.
Complete with patented, adjustable, hard-metal screws, hardened steel cylinder guard and internal key with front body plate. Colour brown or matt chrome. Set of 3 or 5 keys
Sarvuva.lt All rights reserved. Web development Artix.lt
